Publicité
Use the remote control from step 2 to 7.
7 Insert the tape into deck.
insert the tape with the side to be recorded on first facing out
from the unit.
3 Press MODE
repeatedly until "PRGM
EDIT"
appears on the display.
"EDIT" lights up and "PRGM" flashes on the display.
PRGM EDIT
Maximum recording
time for side A
Tape length
Tape side A
(front side)
13 ENGLISH
5 Press the numbered
buttons 0-9 and +10 to
programme a track.
Example: To select the 10th track, press +10 and 0.
Selected
Programme
track
number
Remaining
Programmed
time of side A
track
Tape side B (reverse side)
To stop recording
Press M™. Recording and CD play stop simultaneously.
To check the order of the programmed track numbers
Before recording, press MODE on the remote control to select
side A or B, and press << or ®P repeatedly.
Programme
Programmed
Track number
number
track numbers
Tape side
To change the programme of each side
Press MODE on the remote control to select side A or B, and
press Ml to clear the programme on the selected side. Then
programme tracks again.
To clear the edit programme
Press ll twice so that "EDIT" disappears on the display.
Recording is inhibited if the erasure prevention tab on either
side of the tape is broken off.
Publicité
