Publicité
Leveling the appliance
If your appliance is not leveled, the door and magnetic seal alignment will be affected
and may cause a malfunction. Once the appliance is placed in its final location, adjust
the leveling feet at the front by turning them.
Cleaning before use
Wipe the inside of the appliance with a weak solution of bicarbonate of soda. Then
rinse with warm water using a damp sponge or cloth. Wash the baskets and shelves
in warm soapy water and dry completely before replacing them.
Before plugging in
Check that you have a socket which is compatible with the plug supplied with the
appliance.
DO NOT SWITCH ON UNTIL FOUR HOURS AFTER MOVING THE APPLIANCE.
The coolant fluid needs time to settle. If the appliance is switched off at any time, wait
30 minutes before switching back on to allow the coolant fluid to settle.
Before filling your appliance
Before storing foods in your appliance, turn it on and wait for 24 hours, to make sure
it is working properly and to allow it to reach the correct temperature.
Door right-left change
Depending on your needs, you can change the opening side of the door. You can
choose to open it from the right or from the left. To change the opening side, follow
the instructions.
Warning:
Before changing the opening side of the door, unplug the device from the
mains.
Any removed part must be kept until the end of installation.
27
Publicité
