Publicité
Built-In Installation
•
Do not hold or carry the appliance by the door handle. The door handle cannot hold
the weight of the appliance and may break off.
1. Carefully push the microwave into the box, making sure that it is in the center.
2. Open the door and fasten the microwave with the screws that were supplied.
■
Fully insert the appliance and center it.
■
Do not kink the connecting cable.
■
Screw the appliance into place.
■
The gap between the countertop and the appliance must not be closed by additional
battens.
IMPORTANT INFORMATION
The appliance is designed to be permanently installed with a three-pin power cord and may only be connected by a licensed
expert in accordance with the connection diagram.
Only a qualified electrician who takes the relevant regulations into account may replace the power cord.
Do not use multiple plugs, power strips or extensions. Overloading causes a risk of fire.
If the connection is no longer accessible following installation, an all-pin isolating switch with a contact gap of at least 3 mm must be
provided.
CONNECT THE WIRES OF THE MAINS POWER CORD IN ACCORDANCE WITH THE FOLLOWING COLOR CODING:
Grounding wire
Green and
yellow
Blue
Neutral wire (N)
Brown
Live (L)
68
(E)
10
EN-7
Publicité
