Publicité
When sensing is complete, a beep will sound, and the
calculated cook time will start to count down.
Note: Do not open the door during the sensing
process, or the program will be cancelled.
Once the calculated cook time is displayed, you can
open the door to stir, turn or rearrange the food. Press
Start/Enter to resume operation.
When sensor cook is finished a beep will sound and the
appliance turns off.
Broil
The Broil feature uses intense heat radiated from the
upper element.
You can set two intensity levels:
Broil high
•
Broil low
•
Setting Broil mode
The appliance must be turned off.
1.
Press Broil HIGH-LOW.
2.
Press Broil again, to change to Broil low mode.
Enter the desired cooking time with the number keys.
3.
Press Start/Enter to start the operation.
4.
Clock and Timer Settings
Your oven has various time-setting options. You can use the
Clock
key to call up the menu and switch between the
individual functions.
Setting the cooking time
The cooking time for your meal can be set on the control panel.
When the cooking time has elapsed, the oven switches itself off
automatically. The cooking time cannot be accidentally exceeded.
The oven will start, and the cooking time counts down in the display.
The cooking time has elapsed.
The unit will beep, and the oven will stop heating.
Opening appliance door during operation
Opening the appliance door during operation will
interrupt the current mode. Close the appliance door and
then press Start/Enter to resume operation.
Cancel operation
Press Clear/Off to cancel the active oven mode. The
appliance turns off and the clock is displayed.
The cooling fans may continue to run for a while and then
switch off automatically.
NOTE: Always use a broil pan when cooking in Broil
mode (see optional accessories).
Opening appliance door during operation
Opening the appliance door during operation will
interrupt the current mode. When you close the
appliance door, the operation will be resumed.
Cancel operation
Press Clear/Off to cancel the active oven mode. The
appliance turns off and the clock is displayed.
The cooling fans may continue to run for a while and then
switch off automatically.
Setting the clock
Press Clock.
1.
2.
Enter the correct time using the number keys.
Example: To set the clock to 12:41 type in 1 2 4 1.
Press Start/Enter to confirm.
3.
Changing the clock
Clock
while the unit is on stand-by mode.
Press
1.
The actual time will disappear and then the time will blink in the
display.
2.
Enter the correct time using the number keys.
Press Start/Enter to confirm.
3.
EN-16
Publicité
