Publicité
Opening appliance door during operation
Opening the appliance door during operation will
interrupt the current mode. When you close the
appliance door, operation will be resumed.
Setting Pizza mode for microwave pizza
Place the microwave pizza on the ceramic tray and put it
in the oven following package directions.
Press Pizza.
1.
Press the number key 3 or press Pizza
2.
repeatedly until MICROWAVE PIZZA is displayed.
3.
Press Start/Enter.
Press Start/Enter again. sensing and the microwave
4.
symbol light up on the display.
The appliance will start sensing.
Sensor cooking
You can select two sensor cooking modes. Sensor
cooking allows you to cook many of your favorite foods
without selecting cooking times and power levels. The
microwave oven automatically determines the required
cooking time for each food item.
For best results for cooking by sensor, follow these
recommendations:
Food cooked with the sensor system should start from
•
normal storage temperature.
Turntable tray, ceramic tray, and outside of the
•
container should be dry.
Foods should always be covered loosely with
•
microwavable plastic wrap, wax paper, or lid.
Do not open the door or press the Clear/Off key
•
during sensing time. When sensing time is over, the
oven beeps once and the remaining cooking time will
appear in the display. At this time, you can open the
door to stir, turn or rearrange the food.
When the sensing is complete, a beep will sound, and the
calculated cook time will start to count down.
After the cook time has run out a beep will sound. The
appliance turns off and the clock is displayed.
NOTE: Do not open the door during the sensing
process, or the program will be canceled.
Once the calculated cooking time is displayed, you can
open the door to stir, turn, or rearrange the food. Press
Start/Enter to resume operation.
Opening appliance door during operation
Opening the appliance door during operation will
interrupt the current mode. Close the appliance door and
press Start/Enter to resume operation.
Sensor Reheat
The Sensor Reheat feature lets you reheat dinner plates
or casseroles (8-16 oz.) for your cooking convenience.
Setting Sensor Reheat
1.
Press Sensor Reheat.
Press Start/Enter.
2.
Sensing will be displayed. The microwave will turn on
3.
during sensing.
When the sensing is complete, a beep will sound, and
4.
the calculated cook time will start to count down.
NOTE: Do not open the door during the sensing
process, or the program will be canceled.
Once the calculated cooking time is displayed, you can
open the door to stir, turn, or rearrange the food. Press
Start/Enter to resume operation.
When sensor reheat is finished, a beep will sound, and
the appliance turns off.
NOTES:
Cover with vented plastic wrap or wax paper.
•
Reheat food on a microwaveable dinner plate.
•
EN-14
Publicité
