HBM SCM-HV Guide Rapide page 11

SCM-HV
CAUTION
This marking warns of a potentially dangerous situation
which - if disregarded - can result in slight or moderate
physical injury.
Notice
This marking draws attention to a situation which - if dis­
regarded - can result in damage to property.
DANGER
When applying a dangerous contact voltage to the mea­
suring connections, you must comply with all the related
safety regulations!
DANGER
Voltages with no energy limit that exceed one of the fol­
lowing values are rated as dangerous according to
EN 61010:
1. AC voltage, 33 V rms value
2. AC voltage, 46 V peak value
3. DC voltage, 70 V
Higher voltages must only be applied by qualified person­
nel who are familiar with the dangers involved! It is es­
sential to comply with the related safety regulations!
A3615-4.0 HBM: public
Safety instructions
9