Publicité
1.3.6 Starting the balancing process
The balancing process can be started by turning the wheel.
As soon as the required speed has been reached, "run" will appear
on the display. Manual turning can then be stopped.
The machine measures the wheel imbalance when idling.
The wheel imbalance will appear on the display after the balancing
process.
The braking process can now be initiated.
Now turn the wheel until the respective diodes all light up.
Position the balancing weight on the rim at the 12 o'clock position.
1.4
Technical Data
Maximum wheel weight
Rim diameter
Rim width
Maximum wheel diameter
Balancing accuracy in car mode
Balancing accuracy in lorry mode
Electrical system
Shaft diameter
Balancing programmes
Machine dimensions (L x W x H)
Net/gross weight
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2020-03
All manuals and user guides at all-guides.com
< 200 kg
12 - 24 inches
4 - 15 inches
1,200 mm
+/- 1 g / 0.1 ounce
+/- 10 g / 0.1 ounce
1 / 220 V / 50 Hz
40 mm
"Dynamic" mode (standard)
"Static" mode
Standard "ALU-1", "ALU-2" & "ALU-3" mode
approx. 1330 x 800 x 1700 mm
118 / 180 kg
Manufacturer ATH-Heinl GmbH & CO.KG
- 13 -
Publicité
