Publicité
All manuals and user guides at all-guides.com
1.3.3 Wheel assembly
Stand the wheel on the ground in an upright
position (vertically) and move the balancing
machine so that the balancing shaft is guided into
the centre hole on the rim.
Insert the balancing machine into the rim until the
clamping cone and/or clamping cone extension is
touching the rim.
Now position the cone from the outside and secure
it against falling off using the clamping nut.
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2020-03
Manufacturer ATH-Heinl GmbH & CO.KG
- 8 -
Publicité
