Publicité
5. CABINET INSTALLATION AND ADJUSTMENTS
5.1 POSITIONING OF THE CABINET ON THE FLOOR
If the supporting surface already exists:
1.
Open the closet door (Fig.1).
2.
Place the cabinet in the existing surface and mark points at the holes where the cabinet will be fixed (Fig.2).
3.
Move the cabinet and drill holes in the points just marked.
4.
Insert four expansion anchors into the holes (not supplied) (Fig.3).
5.
Place the cabinet correctly and secure it with appropriate screws, nuts and washers (not included) (Fig.4).
FIG. 1
FIG. 3
8 / 36 - English
All manuals and user guides at all-guides.com
FIG. 2
FIG. 4
6-1622396 - rev. 3 - 21/09/2021
Publicité
