IMPORTANT SAFETY INSTRUCTIONS
EN
WARNING – To guard against injury, basic safety precautions should be observed,
including the following:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
1.
and all the important notices on the appliance before using. Failure to do so may
result in loss of fish life and/or damage to this appliance.
2. DANGER – To avoid possible electric shock, special care should be taken since
water is employed in the use of aquarium equipment. For each of the following
situations, do not attempt repairs yourself; return the appliance to an authorized
service facility for service or discard the appliance.
A. If the appliance shows any sign of abnormal water leakage, immediately unplug
it from thepower source.
B. Carefully examine the appliance after installation. It should not be plugged in if
there is water on parts not intended to be wet. If the appliance or any part of it
falls into the water DO NOT reach for it. First unplug the unit before retrieving.
C. Do not operate any appliance if it has a damaged cord or plug, or if it is
malfunctioning or it is dropped or damaged in any manner. The power cord of
this appliance cannot be replaced; if the cord is damaged, the appliance should
be discarded. Never cut the cord.
D. To avoid the possibility of the
appliance plug or receptacle
getting wet, position the appliance
to one side of a wall mounted
receptacle to prevent water from
dripping onto the receptacle or
plug. A "drip loop" (see illustration)
should be arranged by the user for
the cord connecting appliance to a
receptacle. "The drip loop" is that
part of the cord below the level of
the receptacle or the connector
if an extension cord is used, to
prevent water travelling along the
cord and coming in contact with the receptacle. If the plug or receptacle does
get wet, DO NOT unplug the cord. Disconnect the fuse or circuit breaker that
supplies power to the appliance. Then unplug and examine for presence of
water in receptacle.
3. This appliance is not intended for use by persons (including children) with
significantly impaired physical or mental capabilities, unless they have been
given supervision or instruction concerning the use of the appliance by a person
responsible for their safety. Children should always be supervised to ensure that
they do not play with the appliance.
4. To avoid injury, do not touch moving parts or hot parts.
5. CAUTION - Always unplug or disconnect all appliances in the aquarium from
electricity supply before placing hands in water, before putting on or taking off
parts and while the equipment is being installed, maintained or handled. Never
yank cord to pull plug from outlet. Grasp the plug and pull to disconnect. Always
unplug an appliance from an outlet when not in use.
6. Do not install or store the appliance where it will be exposed to weather or
temperatures below freezing. FOR INDOOR HOUSEHOLD USE ONLY. DO NOT
IMMERSE.
7. Make sure the appliance is mounted correctly and securely positioned on the
aquarium before operating the appliance.
8. If an extension cord is necessary, a cord with proper rating should be used. A
cord rated for less amperes or watts than the appliance rating may overheat.
Care should be taken to arrange the cord so that it will not be tripped over or
pulled. The connection should be carried out by a qualified electrical installer.
9. Use only with Fluval power supply A3970D for luminaire model A3970. Use only Fluval
power supply A3971D for luminaire model A3971.
10. The socket-outlet shall be installed near the equipment and shall be easily accessible.
SAVE THESE INSTRUCTIONS
For the complete use and understanding of this product it is recommended that
this manual is thoroughly read and understood. Failure to do so may result in
damage to this product.
INSTALLATION AND USAGE:
Please verify that all components of the light fixture are undamaged before putting it into operation. Before any
kind of maintenance, always disconnect electrical supply of the light fixture.
• Clean the outside tank surface to ensure the mounting bracket will attach properly.
• Peel off the backing from the self-adhesive on the mounting bracket.
•
bracket with the tank rim. Press firmly to ensure it will stick.
•
and securely positioned on the aquarium before operating the appliance.
• Connect transformer to electrical supply.
MAGNETIC 3-SETTING ON (DAY, NIGHT) AND OFF SWITCH:
MAINTENANCE:
It is important to keep this appliance clean. Unplug transformer prior to cleaning the light fixture and remove from
aquarium. Use both hands when manipulating this appliance. Wipe exposed surfaces carefully with a damp cloth
to remove any dust or mineral deposits that may collect over time. Do not use detergents or harsh cleaners as it
can damage the light fixture. Use Fluval LED Lens Cleaning Non-Aerosol Spray (A3969) to clean the LED portion
of the light fixture. Make sure all surfaces are dry before re-connecting the transformer to the power source.
WARRANTY
3 YEAR LIMITED WARRANTY
The Fluval Nano LED Lamp Fixture is guaranteed against defects in material or workmanship under normal
aquarium usage and service for 3 years. We reserve the right to repair or replace at our option. Failure of less than
5% of the total number of LEDS shall not be considered a defect under the terms of this warranty. This warranty
does apply to any light fixture that has been subjected to misuse, negligence or tampering or commercial use.
No liability is assumed with respect to loss or damage to livestock or personal property irrespective of the cause
thereof.
FOR AUTHORIZED WARRANTY REPAIR SERVICE:
For Authorized Warranty Service please return (well packaged and by registered post) to the address below
enclosing dated receipt and reason for return. If you have any queries or comments about the operation of this
product, please let us try to help you before you return the product to your retailer. Most queries can be handled
promptly with a phone call. When you call (or write), please have all relevant information such as model number,
age of product, details of aquarium set-up, as well as the nature of the problem.
CANADA: Consumer Repair, Rolf C. Hagen Inc., 20500 Trans Canada Hwy,
Baie d'Urfé, QC H9X 0A2
U.S.A.: Rolf C. Hagen (U.S.A.) Corp., 305 Forbes Blvd, Mansfield, MA. 02048
UK: Rolf C. Hagen (UK) Ltd, Customer Service Department California Drive, Whitwood Ind Est., Castleford West
Yorkshire WF10 5QH www.hagen-uk.custhelp.com
CALL US ON OUR TOLL-FREE NUMBER:
CANADA ONLY: 1-800-554-2436 between 9:00 a.m. and 4:30 p.m. Eastern Standard Time.
Ask for Customer Service.
U.S. ONLY: 1-800-724-2436 between 9:00 a.m. and 4:00 p.m. Eastern Standard Time.
Ask for Customer Service.
U.K. ONLY: Helpline Number 01977 556622. Between 9:00 AM and 5:00 PM, Monday to Friday (excluding Bank
Holidays).
RECYCLING: This symbol bears the selective sorting symbol for waste electrical and electronic
equipment (WEEE). This means that this product must be handled pursuant to European Directive
2002/96/EC in order to be recycled or dismantled to minimize its impact on the environment. Check
with your local Environmental Agency for possible disposal instructions or take to an official council
registered refuse collection point. Electronic products not included in the selective sorting process are
potentially dangerous for the environment and human health due to the presence of hazardous substances.