Publicité
CLEANING AND CARE
CAUTION: Before cleaning the unit, turn power off and unplug unit from the outlet.
CLEANING THE TRANSDUCER/ULTRASONIC MEMBRANE
The transducer/ultrasonic membrane must be cleaned as necessary to remove water
mineral deposits. Failure to do so may cause reduced or no mist output.
1. Remove the tank
cover and set aside.
4. Clean the transducer/
ultrasonic membrane
with a 50/50 mix of white
vinegar and water on a
cotton swab. Wipe off
with a damp cotton swab.
NEVER touch the
transducer/ultrasonic
membrane with your
fingers; the natural oils
in the skin can damage
the surface.
NEVER submerge the
base in water or any
other liquid.
2. Remove the tank and pour
out any water remaining in
the tank.
5. After cleaning, reassemble
the humidifier, fill with
water, plug in, and turn on.
/
/
A3
mm
9:100
1
1
10
3. Pour out any remaining water
inside the water reservoir by
pouring in the direction of
the drain arrow.
Publicité
