Publicité
Using the water kettle
When boiling water with this device, you can choose between boiling once or
boiling followed by keeping warm.
Heat water
You can use the water kettle to boil water once. To do this, select the
temperature of 100°C and let the water boil. The device automatically returns
to standby mode and turns itself off in 10 minutes.
To do this, proceed as follows:
1. Fill the water container and close the lid.
2. Place the water kettle on the base and place it on a straight and stable
surface. Plug the power cord into the power outlet. The water kettle will
beep.
3. Press the on/off button located on the top of the handle once to turn on the
water boiler. The water kettle will now be in standby mode and the display
will light up. 4.
4. Then press the function key once. The 100° C display lights up and starts
flashing after two seconds. This signals that the cooking process has started.
1
5. You can see the current temperature of the water from the live temperature
display. When the water reaches the target temperature of 100°C, the water
kettle beeps again and the boiling process ends.
6. Press the on/off button again to turn off the power directly. Otherwise, the
device remains in standby mode and turns off automatically after 10
minutes.
2
15
Heat water and keep warm
By selecting a pre-program, you can bring the water to the desired
temperature and then keep it at the desired temperature for up to 2 hours.
After the two hours, the device switches off automatically.
To do this, proceed as follows:
1. Fill the water container and close the lid.
2. Place the water kettle on the base and place it on a straight and stable
surface. Plug the power cord into the power outlet. The water kettle will
beep.
3. Press the on/off button located on the top of the handle once to turn on the
water kettle. The water kettle will now be in standby mode and the display
will light up.
4. Then press the function button and select the program corresponding to
your desired temperature. Each time you press the button, you will change
your desired water temperature to the next possible one:
100°C for boiling water
90°C for coffee
85°C for black tea
60°C for green tea
40°C for milk
5. After two seconds, the selected temperature starts flashing. The water is
heated until the set temperature is reached.
6. When the desired water temperature is reached, the unit beeps and stops
boiling. It will then automatically enter the keep warm mode.
7. As soon as the water temperature drops below the set temperature, the
water kettle will boil the water to the desired temperature again.
8. The process in steps 6 and 7 repeats until you turn off the device using the
on/off button. After two hours, it will turn off automatically if you do not turn
it off manually first.
9. Press the On/Off button to put the device into standby mode. Now you can
either start a new cooking process via the function button or switch off the
device completely by pressing the on/off button again.
Note
The water kettle has a reminder function. When the keep warm function is active
and the water kettle is removed from the base plate, the water kettle remembers
the temperature and continues to keep the water warm at the desired temperature
as soon as you place it back on the base plate.
16
Publicité
