Changer La Programmation Apres Le Demarrage De La Machine; Annulation D'un Programme Selectionné; Cancelling The Programme - ROSIERES RILS 14853 DN Mode D'emploi

Table des Matières

Publicité

FR
TOUCHE DEBUT/PAUSE
Appuyez sur la touche pour
commencer le cycle.
Note:
QUELQUES SECONDES
APRES AVOIR APPUYE SUR
LA TOUCHE DEBUT, LA
MACHINE MESURE PENDANT
LES 4 PREMIERES MINUTES
LA QUANTITE DE LINGE A
L'INTERIEUR DU TAMBOUR
GRACE A LA FONCTION KG
MODE (ACTIVE
UNIQUEMENT SUR LES
PROGRAMMES COTON ET
SYNTHETIQUES) . AU COURS
DE CETTE PHASE, LES LEDS
DE L'ECRAN TOURNOIENT,
EN AFFICHANT TOUTES LES 5
SECONDES LA DUREE DU
CYCLE MISE A JOUR AU FUR
ET A MESURE DU CALCUL DE
LA MACHINE.
PENDANT CETTE PHASE, LE
VOYANT " KG MODE " EST
ALLUME POUR INDIQUER
QUE LA FONCTION EST
ACTIVE.
CHANGER LA
PROGRAMMATION APRES LE
DEMARRAGE DE LA MACHINE
(PAUSE)
Maintenez la pression sur le
bouton "DEBUT/PAUSE"
durant 2 secondes, les
témoins des boutons
d'options clignoteront et
l'indicateur du temps restant
indiquera que la machine est
en pause. Modifiez et pressez
le bouton "DEBUT/PAUSE"
pour relancer le programme.
Le voyant lumineux " Témoin
de verrouillage de porte "
reste allumé pendant environ
2 minutes. Il est possible
d'ouvrir la porte une fois le
voyant lumineux éteint.
Pour relancer le programme,
appuyez une nouvelle fois
sur le bouton "DEBUT".
ANNULATION D'UN
PROGRAMME SELECTIONNÉ
Afin d'annuler un
programme, positionnez le
sélecteur sur OFF
Sélectionnez un programme
différent
Repositionnez le sélecteur sur
OFF.
EN
START BUTTON
Press to start the selected
cycle.
NOTE:
FEW SECONDS AFTER
THE START THE WASH
CYCLE WILL BEGIN.
DURING THE FIRST 4
MINUTES OF THE WASH
CYCLE, THE KG MODE
(ACTIVE ONLY ON
COTTON AND
SYNTHETICS
PROGRAMMES) WILL
WEIGH THE CLOTHES
AND UPDATE THE
MAXIMUM WASH TIME
REMAINING ON THE
DISPLAY EVERY FIVE
SECONDS UNTIL THE
WEIGHT HAS BEEN
DETERMINED.
WHILE THIS FUNCTION IS
OPERATING THE "Kg
MODE" INDICATOR IS
ON.
CHANGING THE SETTINGS
AFTER THE PROGRAMMES HAS
STARTED (PAUSE)
Press and hold the
"START/PAUSE" button for
about 2 seconds, the flashing
lights on the options buttons
and time remaining indicator
will show that the machine
has been paused, adjust as
required and press the
"START/PAUSE" button again
to cancel the flashing lights.
If you wish to add or remove
items during washing, wait 2
minutes until the safety device
unlocks the door.
When you have carried out
the manoeuvre, close the
door, press START button and
the appliance will continue
working where it left off.
CANCELLING THE
PROGRAMME
To cancel the programme, set
the selector to the OFF
position.
Select a different programme.
Re-set the programme
selector to the OFF position.
M
21

Publicité

Table des Matières
loading

Table des Matières