Publicité
Description
Radio-controlled wireless photocells with control card
RIOCT8WS or RIOCN8WS, complete with buzzer to warn of
fl at batteries or any radio-communication issues.
Main control-card components
① Buzzer
② CH1 and CH2 warning LED
③ Programming buttons T1 and T2
Main casing components
④ Casing base
⑤ Casing cover
⑥ Shell-fastening screw
⑦ card-fastening screw
⑧ Board
Technical data
Type
Power supply (V DC)
Stand-by absorption (μA)
Current draw in transmission (mA)
one CR123A (mAh) lithium battery
* Battery life (months)
FA00948M4A - 11/2017
FA00948M4A - 11/2017
Radio frequency (MHz)
** Radio range over clear areas (m)
Infrared range (m)
Transmission power (dBm)
Materials
* The battery duration is calculated on a yearly average of
20 daily-maneuvers.
** Do not place the RIOCN8WS or the RIOCT8WS card
behind walls, metal fences or any other obstructions that
could interfere with radio communications.
Installing
⚠ Fit the RIOPH8WS photocells near the RIOCN8WS
or the RIOCT8WS card, so as not to have any metal or
cement obstructions.
- Fasten the RIO-LUX base ④ to the DB-L column (not
RIOPH8WS
supplied), or to the wall.
3
- Fit the control card ⑧ into the base ④ and fasten with
80
the supplied screw ⑦.
15
- Save, the RIOPH8WS transmitter and receivers, on the
1700
RIOCT8WS or THE RIOCN8WS control card (SEE THE
24
SAVING CHAPTER).
868.95
30 max.
10 max.
10 max.
PC-ABS
Publicité
