Publicité
automatic, sound activated, synchronized light show. This function is good when you
want an instant show. The first fixture it's DMX input cable will have nothing connect
it, and the other fixtures will be set in slave mode automatically. Their DMX input
cables connect the last fixture DMX output cable (daisy chain). Any fixture can act as
a Master or as a Slave
DMX Controller
The fixture can be set the DMX address remotely by universal DMX controller. First,
you need to programming two scenes into a chase, and then link the fixtures to the
universal DMX controller. When you run the chase, all the fixtures of the chain will be
set the series DMX address automatically. The fixture uses four channels. Please refer
to the following diagram to set the address for the first four units.
8 channels DMX protocol :
Channel
1
2
3
4
Function
Pan
Tilt
Pan / Tilt Speed
Colors
Value
Setting
000-255
0~100%
0~100%
000-255
000-255
From slow to fast
000-008
White
009-017
White + Color 1
018-026
Color 1
027-035
Color 1 + Color 2
036-044
Color 2
045-053
Color 2 + Color 3
054-062
Color 3
063-071
Color 3 + Color 4
072-080
Color 4
081-089
Color 4 + Color 5
090-098
Color 5
099-107
Color 5 + Color 6
108-116
Color 6
117-125
Color 6 + Color 7
126-127
Color 7
128-255
Rotating rainbow effect
From slow to fast
16
Publicité
