To deactivate the function: touch
previous heat setting comes on.
When you deactivate the hob, you also
deactivate this function.
5.11 Child Safety Device
This function prevents an accidental
operation of the hob.
To activate the function: activate the hob
with
. Do not set the heat setting. Touch
for 4 seconds.
comes on. Deactivate the
hob with
.
To deactivate the function: activate the hob
with
. Do not set the heat setting. Touch
for 4 seconds.
comes on. Deactivate the
hob with
.
To override the function for only one
cooking time: activate the hob with
comes on. Touch
heat setting in 10 seconds. You can
operate the hob. When you deactivate the
hob with
the function operates again.
5.12 OffSound Control (Deactivating
and activating the sounds)
Deactivate the hob. Touch
The display comes on and goes out. Touch
for 3 seconds.
of the timer to choose one of the following:
•
- the sounds are off
•
- the sounds are on
To confirm your selection wait until the hob
deactivates automatically.
When the function is set to
the sounds only when:
• you touch
• Minute Minder comes down
• Count Down Timer comes down
• you put something on the control panel.
. The
.
for 4 seconds. Set the
for 3 seconds.
or
comes on. Touch
you can hear
5.13 Power management
• Cooking zones are grouped according to
the location and number of the phases in
the hob. See the illustration.
• Each phase has a maximum electricity
loading of 3700 W.
• The function divides the power between
cooking zones connected to the same
phase.
• The function activates when the total
electricity loading of the cooking zones
connected to a single phase exceeds
3700 W.
• The function decreases the power to the
other cooking zones connected to the
same phase.
• The heat setting display of the reduced
zones alternates between the chosen heat
setting and the reduced heat setting. After
some time the heat setting display of the
reduced zones stays on the reduced heat
setting.
5.14 Hob²Hood
It is an advanced automatic function which
connects the hob to a special hood. Both the
hob and the hood have an infrared signal
communicator. Speed of the fan is defined
automatically on basis of mode setting and
temperature of the hottest cookware on the
hob. You can also operate the fan from the
hob manually.
For most of the hoods the remote system
is originally activated. In case it is
deactivated, activate it before you use
the function. For more information refer
to hood user manual.
ENGLISH
13