Publicité
Grinding
1. The angle between the grinding wheel and the workpiece is about 15 degrees, and partial contact renders
the best effect;
2. To avoid overheating, discoloration or crazing of the workpiece, please apply light force to move the
machine body back and forth;
3. Never grind with the cutting blade;
4. In order to prevent sparks and grinding debris from shooting on the body of the operator, select an
appropriate way to hold the machine according to the rotation direction of the grinding wheel.
Product parameters
Rated voltage
Rated frequency
Rated power
Rated speed
Specifications
Switch position
Spindle thread
Insulation class
Warnings
1. Use safety glasses. When there is much debris or dust, please wear a mask and always wear goggles.
2. Do not drill holes at the machine parts during use, which may cause electric leakage.
3. When putting down the angle grinder after work, first confirm whether the angle grinder is completely
stopped, otherwise, it may damage other items.
4. If the machine is damaged due to accidental dampness, falling or natural damage due to long-term use,
please have it timely maintained by professionals, and it shall be used only after passing the insulation
test.
5. Ensure that the air inlet and outlet of the machine are free of foreign matters during use to prevent the
machine from heating and damage.
EN
10
Item No.
Note:
Metal grinding will generate sparks. It is
strictly prohibited to store any combustible
materials within the spark scattering range
to avoid fire!
DL-JM125-E4
220-240V~
50-60HZ
1200W
12000rpm
φ125mm
Side
M14
Class II
Publicité
