Publicité
7
Maintenance
EN
Caution! Stop the product, release the pressure
SV
and remove the battery before you clean, install, do main-
tenance, transport or keep the product in storage.
● Only use spare parts and accessories recommended
NO
by the manufacturer.
● Do a check at regular intervals that screw unions and
PL
retaining screws are tightened.
● Repairs must only be done by an approved service
DE
centre.
● Clean the product regularly, use a dry cloth to clean
the product.
FI
7.1
To clean the product
FR
● Keep the ventilation openings on the product clean,
use a soft brush or damp cloth.
NL
● If the nozzles on the spray head are dirty or blocked
they can be cleaned with a needle.
● Rinse the nozzles with water to remove contamination.
Note! If detergent has been used, flush the product with
fresh water. Do the steps that follow:
1
Remove the detergent container and operate the
product until clear water comes out of the nozzle.
2
Release the power trigger.
3
Remove the battery from the product.
4
Disconnect the product from the water supply.
5
Push the lock button and then the power trigger to
release the remaining pressure in the system.
8
Publicité
