Publicité
Problem
Robot does not climb the
wall
The robot touches the wall
but does not reverse course Sensor failure
The indicator light on the
charger is off while the
cleaner is charging
The battery will not
charge
The robot does not clean
the entire pool
Possible Causes
Sensor failure
Full or clogged filter basket
The filter basket is full
Incorrect mode setting
The charger may be damaged Replace the charger
The charger may be damaged Replace the charger
The charging pins are
corroded
The battery may be damaged Go to
Sensor failure
The shape of the pool is
unusual or custom
The motor may be damaged Go to
15
Solution
Go to
www.inopool-us.com
section and follow the instructions for
additional help.
Check the filter basket and if clogged,
clean it thoroughly
Check the filter basket and if full,
empty, and clean thoroughly
Open the mobile APP, check the settings,
and change to wall-climbing mode
Go to
www.inopool-us.com
section and follow the instructions for
additional help
Carefully clean the charging pins with
baking soda or Go to www.inopool-
us.com Support section and follow the
instructions for additional help
www.inopool-us.com
Support section and follow the
instructions for additional help
Go to
www.inopool-us.com
Support section and follow
the instructions for additional
help
Open the mobile APP, check the settings,
and adjust the cleaning mode.
www.inopool-us.com
Support section and follow the
instructions for additional help
Support
Support
Publicité
