Publicité
If you do not touch
deactivates after 20 seconds.
The maximum setting of the time for
the DURATION is 90 minutes.
You can change the microwave
power (touch
and then
and the DURATION (touch
when the Microwave function operates.
4. When the set time ends, an acoustic
signal sounds for 2 minutes. The
Microwave function deactivates
automatically. Touch a sensor field to
stop the acoustic signal.
To deactivate the appliance, touch
If you touch
function stops. To start it again, touch
.
The maximum time of microwave functions
depends on microwave power you set:
MICROWAVE
POWER
W
100 - 600
>600
7.4 Setting the Combi function
1. Activate an oven function. Refer to
"Setting the oven function".
8. CLOCK FUNCTIONS
8.1 Clock functions table
To set the count up, which shows
how long the appliance operates. This
COUNT
function has no effect on the opera‐
UP TIM‐
tion of the appliance.
ER
, the appliance
or
)
) any time
.
or open the door, the
MAXIMUM TIME
min
90
7
2. Touch
and do the same steps as
when you set the Microwave function.
The Combi function is not available with the
function END, SET + GO.
If you set the END function
normal oven function, it changes to the
DURATION
in the Combi function.
If you set the DURATION function
the normal oven function, it stays active
for the Combi function. If the set
DURATION is longer than 90 minutes, it
is not possible to activate the Combi
function.
When you use the Microwave function in
Combi mode the Microwave power cannot be
more than 600 W.
7.5 Setting the Quick Start function
1. Touch
to deactivate the appliance.
2. Touch
to activate the Quick Start
function.
Each touch of
adds 30 seconds to the
duration time.
You can change the microwave
power (refer to "Setting the Microwave
function").
3. Touch
to set the time for the
DURATION function. Refer to "Setting the
DURATION".
To show the time of day. To change
the time of day, refer to "Setting the
TIME
time".
OF DAY
for the
for
ENGLISH
13
Publicité
