2. Press
or the display shows again the
set temperature automatically after 5
seconds.
6.5 How to set: Fast Heat Up
Do not put food in the oven when the Fast
heat up works.
The Fast Heat Up is available only for some
heating functions. If Faulty Tone is turned on
in the settings menu, the signal sounds if the
7. MICROWAVE MODE
WARNING!
Refer to Safety chapters.
7.1 Using microwave bottom glass
plate
CAUTION!
Use the microwave bottom glass plate
only with microwave function. Remove
the accessory when you switch to
another function e.g. grilling.
WARNING!
The microwave bottom glass plate can
become hot when the appliance
operates.
Use the microwave bottom glass plate
whenever the microwave function is on. It is
necessary for heating food or liquids.
Put the accessory on the bottom of the cavity.
Put the food on the microwave bottom glass
plate.
7.2 Microwave functions
Func‐
Description
tions
Micro‐
Creates the heat directly in the food.
wave
Use it to heat pre-prepared meals and
drinks, to defrost meat or fruit, and to
cook vegetables and fish.
12
ENGLISH
Fast Heat Up is not available for the set
function. Refer to "Additional functions"
chapter, Using the settings menu.
The Fast Heat Up decreases the heat up
time.
To turn on the Fast Heat Up press and hold
for more than 3 seconds.
If the Fast Heat Up is turned on the display
shows flashing bars.
Func‐
Description
tions
Combi
Use it to operate the oven function
and the microwave mode together.
Use it to cook food in a shorter time
and brown it at the same time.
Quick
Use it to activate the Microwave func‐
Start
tion with one touch of the sensor field
with the maximum microwave
power. Operating time: 30 seconds.
7.3 Setting the Microwave function
Deactivate the appliance to use the normal
Microwave function.
1. Touch
to activate the Microwave
function.
The display shows the symbol
default microwave power.
2. Touch
or
microwave power. The power setting
changes in 100 Watt steps.
3. Touch
to set the DURATION. Refer to
"Setting the DURATION". Confirm with
to start the Microwave function.
If you do not set the DURATION
and start the Microwave function with
directly, the duration is 30
seconds. Each press of this sensor
field adds 30 seconds to the duration.
and the
to change the