Publicité
An automatic programme with a weight
/
input operates.
A clock function operates.
/
You can set the power for the micro‐
wave function.
Temperature / Fast heat up
The function operates.
Temperature
The current temperature is indicated.
5. BEFORE FIRST USE
WARNING!
Refer to Safety chapters.
5.1 Initial preheating and cleaning
Preheat the empty appliance before the first
use and contact with food. The appliance can
emit unpleasant smell and smoke. Ventilate
the room during preheating.
1. Remove all accessories and removable
shelf supports from the appliance.
2. Set the function
temperature. Let the appliance operate
for 1 h.
3. Set the function
temperature. Let the appliance operate
for 15 min.
4. Set the function
temperature. Let the appliance operate
for 15 min.
5. Turn off the appliance and wait until it is
cold.
6. Clean the appliance and the accessories
only with a microfibre cloth, warm water
and a mild detergent.
7. Put the accessories and removable shelf
supports back to their initial position.
10
ENGLISH
. Set the maximum
. Set the maximum
. Set the maximum
Temperature
You can change the temperature.
Light
You deactivated the light.
Minute minder
The minute minder function operates.
4.3 Heat up indicator
If you turn on the heating function,
appears. The bars show that the temperature
in the oven increases or decreases.
When the oven is at the set temperature, the
bars go off the display.
5.2 Setting the time
After the first connection to the mains, all
symbols in the display are on for some
seconds. For the subsequent few seconds
the display shows the software version.
After the software version goes off, the
display shows h and 12:00.
1. Touch
or
2. Touch
.
3. Touch
or
4. Touch
or
The Temperature / Time display shows the
new time.
5.3 Changing the time
You can change the time of day only when
the appliance is off.
Touch
again and again until
the display.
To set the new time of day, refer to "Setting
the time".
to set the hours.
to set the minutes.
.
flashes in
Publicité
