Manuels Connexes pour Tenzo R-PB21
Sommaire des Matières pour Tenzo R-PB21
- Page 1 INSTALLATION MANUAL & USER GUIDE MANUEL D’INSTALLATION & GUIDE DU PROPRIÉTAIRE MODELS / MODÈLES: R-PB21 / R-PB22R...
- Page 2 Tënzo’s warranty do not cover any labor cost for the replacement of the defective product, including removal and re- instalation. TOLL FREE: 855-481-0581 EMAIL: support@tenzo.ca If you need assistance or service, please contact the point of sale or where the product was purchased by the original owner or Tënzo technical service at support@tenzo.ca ALWAYS FOLLOW THE PLUMBING AND BUILDING CODES IN FORCED An original proof of purchase will be necessary for any claim under warranty.
- Page 3 MAINTENANCE & CLEANING MIN - MAX Your Tënzo product is manufactured with high quality materials and requires no particular maintenance. However, a weekly maintenance with a non-abrasive soft soap, free of bleach, ammoniac or citrus-based is recommended to clean stains caused by residual soap or minerals contained in water. A solution of water and vinegar (50/50) is recommended for the maintenance of the product.
- Page 4 Installation Installation Page. 6 Page. 7...
- Page 5 STEP #1 / ÉTAPE #1 STEP #2 / ÉTAPE #2 A Secure the valve in place on a solid section of the wall using the 4 screws. Make sure that the depth A Remove the test cap and drain the water supplies for 1 minute. of the wall is between MIN and MAX.
- Page 6 STEP #4 / ÉTAPE #4 A Screw the fixing plate using the 4 screws provided in the assembly. ______________________________________________ B Insert the decorative cylinder onto the valve blank and secure it in place with the domed nut. ______________________________________________ A Visser la plaque de fixation a l’aide des 4 vis fourni dans l’assemblage. ______________________________________________ B Inserer le cylindre décoratif sur le brut de valve et fixer le en place avec l’écrou domé.