T0ece (OeK NC
Your microwave
oven has a sensor
that detects
the humidity
released
by the food.
The amount
of humidity
detected
tells the oven how long to
cook or heat your food.
You can use Sensor
ONE TOUCH
cooking
when
preparing
any of
8 types
of food. Just
touch
the pad for the food
you want to cook or heat. The simple
instructions
for these functions
are on the
following
pages.
NOTES:
• If you want to cook by entering a time and cook
power, see "Microwave
cooking tips" in the
"Cooking Guide" section.
• The oven should be plugged in at least 2½
minutes before sensor cooking.
• Room temperature
should not exceed 95°F (35°C).
• Be sure the exterior of the cooking container and
the interior of the oven are dry. Wipe off each with a
paper towel.
• When covering foods, be sure to leave an opening
big enough for moisture to escape so that the
sensor can determine cooking or reheating time.
To use Sensor
ONE TOUCH
Cooking:
1. Put the food in the oven and close the
door.
2. Touch a Sensor
ONE TOUCH
pad.
Sensor ONE TOUCH Cooking will start
automatically
after a short delay.
(See Sensor One Touch Cooking Chart.)
3. The progress
bar at the bottom
of the
display, shows
the approximate
time
remaining.
31