Publicité
3
Connect four Part E to the corner connector on the same side
at the same time. The steel pipe with holes faces downwards
to fix the roof cover and the side without holes will be inserted
into Part A & Part B. Pay attention to keeping the Part D
parallel to the ground during the connection, otherwise it may
damage the roof. Then connect the other side.
08
4
Pull the four sides with hooks and hook the hole on pipe to
fix the roof cover. Insert Part O into the hole on foot base.
On hard surface, you can use Part N which play the same
role. You need to drill a hole on hard surface with an electric
drill in advance.
5
Unfold the two sidewalls (Part H) and two zipper door (Part I) and
then fix them on the pipe. This is only for AW10019. For AW10020,
Part H and Part I are not included.
Use ground pegs (Part P) to strengthen the stability. On hard
surface, you can use Part M which play the same role. You need
to drill a hole on hard surface with an electric drill in advance.
09
Publicité
