I.attention Matters - Hyundai HY CLM09KR 001 Manuel Utilisateur

I.Attention Matters

Warning matters:
1. Do not use means to accelerate the defrosting process or to clean, other than those
recommended by the manufacturer.
2. The appliance shall be stored in a room without continuously operating ignition sources
(for example: open flames, an operating gas appliance or an operating electric heater.)
3. Do not pierce or burn.
4. Be aware that refrigerants may not contain an odour.
5. Appliance shall be installed, operated and stored in a room with a floor area larger than 11 m2
7. Keep any required ventilation openings clear of obstruction;
8. Servicing shall be performed only as recommended by the manufacturer.
9. The appliance shall be stored in a well-ventilated area where the room size corresponds
to the room area as specified for operation.
10. Any person who is involved with working on or breaking into a refrigerant circuit should
hold a current valid certificate from an industry-accredited assessment authority, which authorises
their competence to handle refrigerants safely in accordance with an industry recognised assessment
specification.
11. Servicing shall only be performed as recommended by the equipment manufacturer.
Maintenance and repair requiring the assistance of other skilled personnel shall be carried out under
the supervision of the person competent in the use of flammable refrigerants.
12. All working procedure that affects safety means shall only be carried by competent
persons.
13. The appliance shall be stored so as to prevent mechanical damage from occurring.
Notes:
*The air conditioning is only suitable for indoor use, and is not suitable for other applications.
*Follow local grid interconnection rules while installing the air conditioning and ensure that it is
properly grounded. If you have any question on electrical installation, follow the instructions of the
manufacturer, and if necessary, ask a professional electrician to install it.
*Place the machine in a flat and dry place and keep a distance of above 50cm between the machine and the
surrounding objects or walls.
*After the air conditioning is installed, ensure that the power plug is intact and firmly plugged into
the power outlet, and place the power cord orderly to prevent someone from being tripped or pulling out
the plug.
*Do not put any object into the air inlet and outlet of the air conditioning. Keep the air inlet and outlet
free from obstructions.
*When drainage pipes are installed, ensure that the drainage pipes are properly connected, and are not
distorted or bended.
* While adjusting the upper and lower wind-guide strips of the air outlet, pluck it with hands gently
to avoid damaging wind-guide strips.
*When moving the machine, make sure that it is in an upright position.
*The machine should stay away from gasoline, flammable gas, stoves and other heat sources.
* Don't disassemble, overhaul and modify the machine arbitrarily, otherwise it will cause a machine
malfunction or even bring harm to persons and properties. To avoid danger, if a machine failure occurs,
ask the manufacturer or professionals to repair it.
Licensed by HYUNDAI Corporation Holdings, Korea
Imported/distributed by MARKET MAKER GROUP S.A.
25