Publicité
OPERATING
Replacing The Swivel
1.
2.
3.
4.
5.
6.
your exposure to these chemicals: work in a well ventilated area, and
work with approved safety equipment, such as those dust masks that
are specially designed to filter out microscopic particles.
Turn off and disconnect supply line from swivel inlet.
Remove swivel assembly from reel axle.
Remove circlip from swivel, and take apart. Note: You may want to
remove swivel from reel hose end, but this in not necessary unless a
new swivel is being installed.
Replace the seals and reassemble swivel.
Use Teflon type or thread sealant on swivel thread fitting, reconnect
the swivel thread fitting with axle.
Re-connect inlet supply line.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
7
Publicité
