Publicité
OPERATING
Service Instructions
injury, product or property damage.
all spring tension. Hazards or unsafe practices COULD result in
severe personal injury or death.
1.
Replacing The Hose
1.
2.
3.
4.
5.
6.
6
Remove all tension before servicing. Hazards
or unsafe practices MAY result in minor personal
Before performing any service, always disconnect
and lock out compressed air or fluid, and remove
User servicing of the reel is limited to replacing input/output hoses
only. Refer all other repairs to an authorized service person. Failure to
do so can result in personal injury and/or equipment damage and may
void the warranty.
To remove the hose pull out the hose leaving 2 to 3 feet on the spool.
Engage the latch pawl.
Unthread the hose at the connection to the swivel tube. Remove the
hose to install the hose
Route the hose through the guide arm rollers and opening of the spool.
Apply thread tape or sealant to hose threads.
Screw hose fitting into threaded fitting on swivel. Tighten connection
with a wrench on fitting.
Install hose bumper on working end of hose if required.
Disengage latch pawl and allow hose to retract.
Publicité
