Identification Labels; Certification - Dynafit DAYMAKER Notice D'emploi

used regularly or not. Extreme and very demanding usage can
even lead to a lifespan of less than one year. If the helmet suf-
fers any extreme shock loads such as those that arise following
a climber falling, or in cases of rock and ice fall, it must be re-
placed immediately even if there are no visible signs of damage.
STORAGE TRANSPORT AND CARE:
E
Storage: You should store your helmet somewhere dry, cool and
well ventilated, away from direct sunlight. Avoid storing the hel-
met near any heat sources, nor anywhere where it is exposed
to direct or persistent UV rays or extreme temperatures. Do not
store your helmet in your backpack. Ensure that your helmet
never comes into contact with aggressive chemicals such as bat-
tery acid, solvents or salt.
Cleaning and maintenance: Heavy soiling on your helmet can be
washed off with mild soap but do not use any chemical cleaning
products or solvents. Rinse your helmet thoroughly after clean-
ing and dry it all over with a towel. Do not carry out any repairs
or modify your helmet yourself. If you notice that the helmet is
damaged, you should replace it. Any incorrect action performed
on your helmet or any changes made to it can adversely affect
the helmet's protective capability. If you have any questions re-
garding replacement parts for your helmet, please contact your
DYNAFIT specialist dealer.
Transport: Protect your helmet from any mechanical wear or
damage, solar radiation, chemicals or dirt. The best approach is
to get a protective bag for your helmet and/or a special storage
and transport container. Your helmet is delivered in a robust box
which can be used for this purpose.
IDENTIFICATION LABELS: Illustration 6 Product markings
F

CERTIFICATION:

G
Dolomiticert S.c.a.r.l. Notified Body n 2008 Z.I. Villanova, 1
32013 Longarone Italy
MANUFACTURER:
Oberalp AG, Via Waltraud Gebert Deeg 4, 39100 Bolzano
H
19