Publicité
Optional Installation
These connections are optional. Your UPS will function properly without these connections.
USB and RS-232 Serial
1
Communications
Use the included USB cable (see
or DB9 serial cable (see
communication port on your computer to
the communication port of your UPS. Install
on your computer the Tripp Lite PowerAlert
software appropriate to your computer's
operating system. Your UPS may feature
additional communications ports. These
ports may also be connected to additional
computers which have PowerAlert
installed. Consult your PowerAlert manual
for more information.
EPO Port Connection
2
This optional feature is only for those
applications which require connection to a
facility's Emergency Power Off (EPO) circuit.
When the UPS is connected to this circuit, it
enables emergency shutdown of the UPS's
inverter.
Using the cable provided, connect the EPO
port of your UPS (see
normally closed or normally open switch
according to the circuit diagram (see
Note: The EPO port is not a phone line surge
suppressor; do not connect a phone line to this
port.
21-10-019-933903-Book.indb 6
21-10-019-933903-Book.indb 6
) and/
1A
) to connect the
1B
software
®
) to a user-supplied
2A
).
2B
6
SMX500RT1U
Shown
1A
SMX500RT1U
1B
Shown
SMX500RT1U
2A
Shown
2B
4-5
10/14/2021 3:37:47 PM
10/14/2021 3:37:47 PM
Publicité
