Vermeiren Albatros II Manuel D'utilisation page 22

EN
NL
5. Dismantle the actuator (motor) from
the cantilever arm by removing the
locking pin .
6. Move the actuator to the bottom
position and place the actuator in the
black clip .
7.
Remove the slide and slide holder
 from the cantilver arm  with the
locking pin .
8. Loosen the lever . Remove the
slide column
attachment  out the tube of the patient
hoist frame.
18
Albatros II
2022-10
Installation and adjustment
and foot support
