Vermeiren Albatros II Manuel D'utilisation page 20

EN
NL
9. Attach the footplate with the hooks to the chassis of the
patient hoist.
10. Attach the leg support  with the locking pin . Position the
leg support  to the desired height and depth.
11. Mount the thorax support  to the slide column
 with the locking pin  in a comfortable height
for every patient.
16
Installation and adjustment
7.
Pull the actuator gently out the black
clip .
8. Attach the actuator on the cantilever
arm by the locking pin . Take care
that the actuator is positioned very
well between the cantilever arm.
Albatros II
2022-10