Publicité
6. OPTIONS
• Desired options must be activated every
time before you start a programme. It is
not possible to activate or deactivate
options while a programme is running.
• The option button toggles between the
available options and their possible
combinations.
• Not all options are compatible with each
other. If you select non compatible
options, the appliance automatically
deactivates one or more of them. Only the
indicators of the still active options are on.
• If an option is not applicable to a
programme, the related indicator is off or it
flashes quickly for a few seconds and then
goes out.
• Activating options can affect the water and
energy consumption as well as the
programme duration.
6.1 GlassCare
This option protects a delicate load,
glassware in particular, from damaging. It
prevents rapid changes in the dishwashing
temperature of the selected programme and
reduces it to 45 °C.
How to activate GlassCare
Press Option until the indicator
7. SETTINGS
7.1 Programme selection mode and
user mode
When the appliance is in programme
selection mode, you can set a programme
and enter user mode.
You can also view the number of completed
dishwashing cycles.
Settings available in the user mode:
• The level of water softener according to
the water hardness.
• Activation or deactivation of the rinse aid
empty notification.
• Activation or deactivation of the AirDry.
The display shows the updated programme
duration.
6.2 ExtraPower
This option improves the dishwashing results
of the selected programme. It increases the
wash temperature and duration.
How to activate ExtraPower
Press Option until the indicator
The display shows the updated programme
duration.
6.3 ExtraHygiene
This option provides better cleaning results
by keeping the temperature between 65 and
70 °C for at least 10 minutes during the last
rinsing phase.
How to activate ExtraHygiene
Press Option until the indicator
The display shows the updated programme
duration.
is on.
• Factory reset.
The saved settings remain valid until you
change them again.
How to set the programme selection
mode
The appliance is in programme selection
mode when the programme indicator
is on and the display shows the programme
duration.
After activation, the appliance is in
programme selection mode by default. If not,
is on.
is on.
ENGLISH
9
Publicité
