HQ Power MICW42 Notice D'emploi page 4

b. Frequency / Channel Selection
Press SET until you see the display as below.
Wait 2 to 3 seconds. Each channel has its own frequency. Choose the channel / frequency using ▲ or ▼ and
press SET to confirm.
c. Setting the Setup Lock
Press SET until you see the display as below.
Choose whether you want to lock the present status or not by using ▲ or ▼. Press SET to confirm.
8. Monitoring Your System
Insert stereo headphones (not incl.) to monitor the vocals via
headphones.
9. The Microphone
a. Inserting the Batteries
Make sure the microphone has been switched off. To do so, hold the power button on the bottom of the
microphone pressed for 2 seconds.
Press and pull the bottom cap (order code MICW46) of the microphone.
Open the microphone by twisting the microphone head from the bottom
part. Make sure not to remove the element protection grille.
Insert 2 x AA batteries respecting the polarity. Reassemble your
microphone.
b. Description
1. power button
2. built-in transmitter
3. condenser and protection grille
4. battery cover
5. power indicator: a flashing LED means the batteries are
low – replace the batteries (see "8.a. Inserting the
Batteries")
6. ▲▼ buttons – selection buttons
7. SET – menu setting and confirmation button
MICW42 4 HQPOWER