Bresser DigiMicro DM700 LCD Mode D'emploi page 24

Self-timer Mode
1. Self-timer mode symbol
Digital Video Mode
1. Digital video mode symbol
2. Memory Symbol. If you have inserted an
SD memory card, a corresponding symbol
appears.
3. Amount of video that can be stored in the
memory
4. Picture resolution (number of pixels) VGA,
QVGA
24
Picture Index Mode
1. Symbol for photo or video
2. Memory Symbol. If you have inserted an
SD memory card, a corresponding symbol
appears.
3. Name of the currently selected fi le
4. Image resolution
5. Symbol for start, stop and pause for video
mode
5. Settings
Resolution Setting
• Press the menu key in either digital photo,
digital video or self-timer mode in order to
open the settings menu.
• Select the required resolution (3M =
2048×1536, 2M = 1600×1200, 1M =
1280×1024, VGA = 640×480, QVGA =
320x240 for videos) with the arrow keys
( , ).
• Press „OK" to confi rm and „Snap" to leave
the menu.
• Press „Snap" to leave the menu without
changes.
The resolution depends on the type of picture
that you want. The higher the resolution, the
better the picture quality. However, the re-
quired storage space is also higher, so fewer
pictures can be saved. It is best to use the
available fl ash memory with a carefully adjust-
ed picture resolution.
As listed below, you have fi ve options for the
picture resolution (selection options). If you
would like better image quality, select a higher
resolution. The possible number of pictures
depends on the circumstances (See table.)
Light Settings
• In the digital photo or self-timer modes, se-
lect the menu key (Menu) in order to open
the light settings menu.
• Press the arrow keys ( , ) to access the
setup menu
• Using the arrow keys ( ,
„Lighting" option. Press the OK key to con-
fi rm.
• Using the arrow keys ( ,
), select the
), select the