Publicité
Normatec 2.0 Arm Attachment (single-person use only)
Normatec 2.0 Hip Attachment (single-person use only)
Normatec 2.0 Power Supply
OPERATING INSTRUCTIONS
WARNING! BEFORE OPERATING THIS CONTROL UNIT: Read all warnings at the beginning of this manual. If you do
not understand these operating instructions, contact Hyperice at +1.949.565.4994.
SET UP THE SYSTEM
•
Step 1: Plug the power supply into an electrical outlet and then into the Normatec 2.0 control unit.
This control unit is equipped with a lithium ion battery. The battery automatically charges when the power supply
is connected to the Normatec 2.0 control unit and an electrical outlet.
1. Attachment connector
2. Zones
1. Attachment connectors
2. Zones
1. Wall outlet plug
2. Barrel connector
Publicité
