Publicité
Installation
4.2
Attaching
▶ Remove the solar kit's plastic cover.
▶ Attach the base in such a way as to keep it horizontal, by
using the screws, metal washers and bushings that are
provided.
Fig. 2
▶ Remove the water covers that are provided on the Kit's 5
connections.
▶ Connect the appliance using suitable accessories.
▶ Loosen the screws that are inserted at the base of the solar
kit, in order to insert the plastic cover.
▶ Place the plastic cover.
▶ Adjust the tightness of the 2 screws on the cover, so that
the cover is firmly in place.
WARNING:
Never rest the Solar Kit on the water
connections.
WARNING:
When attaching the support to the wall, keep
in mind that there may be water pipes
present!
6
4.3
Interconnecting with an existing installation
Fig. 3
[1] Cold water from the distribution network
[2] Hot water from the solar system
[3] Appliance support inlet
[4] Appliance support outlet
[5] Hot water for the distribution network
The Solar Kit is interconnected with the existing installation, as
per the legend shown above and using suitable flexible hoses:
At connections no. 2 and 5 rubber washers
need to be used.
All connections in the set are of type M 3/4".
Shutoff valves are recommended on the
water branch lines linked to the Solar Kit.
Shutoff valves are recommended on the
water branch lines linked to the Solar Kit.
NOTICE: damaged parts!
Water dirtness may cause damaged to
several parts.
▶ Place the water filter (Fig. 1, [15]) in the
water inlet (Fig. 3, [1]).
Solar Kit – 6 720 608 087 (2022/06)
Publicité
