Publicité
A
3. Install the console fridge on the car cigar lighter.
4. Connect the included DC power cable with the
car cigar lighter.
5. FUNCTION AND OPERATION
1
5
Power supply: connect to DC 12V/24V or AC 100~240V(using dedicated adapter) or solar
(12~50V) power supply.
Display Screen Initialization: when the fridge is powered on, the buzzer will make a long
beep, and the display will be on for two seconds then enter the standby mode.
Power On/Off: press
Temperature Setting: press
automatically after stopping operating for 4 seconds (Note: the temperature displayed is
the current temperature of the compartment, it'll take a while to reach the set temperature.)
Temperature setting range: -20~20°C (-4~68°F)
Cooling Mode: under the running state, press
(Energy saving Mode).(*Factory setting is MAX.)
Battery Protection Mode: under the running state, long press
screen flashes, then press
L(Low) (*Factory setting is H.)
Voltage Reference:
INPUT
MODE
CUT OUT
L
M
H
* the voltage is theoretical value, there may be a deviation in different sceneries.
* H should be set when the product is connected to car power, and M or L should be set
when it is connected to a portable battery or other back-up battery.
Temperature Unit Setting: switch off the fridge, long press
E1, and switch to E5 by pressing
Fahrenheit. (*Factory setting is °C.)
2
3
4
to switch ON, long press
or
again to select protection mode H(High), M(Medium) and
DC 12V
CUT IN
8.5V
10.9V
10.1V
11.4V
11.1V
12.4V
again, then press
1
Temp. control
2
Led display
3
ON / OFF
5
for three seconds to switch OFF.
for temperature setting, the setting will be saved
to switch MAX (fast cooling) and ECO
CUT OUT
21.3V
22.3V
24.3V
A
1
2
4
Set
5
USB: 5V/1A
for three seconds until
DC 24V
CUT IN
22.7V
23.7V
25.7V
for 3 seconds until displays
or
to switch Celsius or
3
4
ENG
17
Publicité
