ulsonix AIRCLEAN 10G Manuel D'utilisation page 35


Auto mode operation: turn the device on with "Auto" button, the display will show
"ON" / device operation time and program reference number P1, P2, or P3 (switch
between programs by pushing the "Auto" button in sequence). The device is
delivered with three default programs:

P1: 10 minute operation / 20 minute pause / 5 rounds

P2: 20 minute operation / 20 minute pause / 5 rounds

P3: 40 minute operation / 20 minute pause / 5 rounds
Operation times / pause and number of rounds can be freely modified in each of
these programs. Modification of operation time, pause and number of rounds:
Operation times / pause and number of rounds can be freely modified in each of
these programs. To do this press the "Set" button while in the program which you
wish to modify (P1, P2 or P3). Starting with P1, press "Set" to move to operation
time setting, the display will show "Set Pro. ON" as well as blinking operation time
setting – change it to your desired value using "Up"/"Down" buttons. Press "Set"
to move to pause time setting, the display will show "Set Pro. OFF" as well as
blinking pause time setting – change it to your desired value using "Up"/"Down"
buttons. Press "Set" to move to number of rounds setting. The display will show
"Set Pro. ON OFF" as well as blinking number of rounds. Use "Up"/"Down" buttons
to set your desired value and press "Set" to move to modification of program 2
(P2). Use the same procedure for the remaining programmes. To exit programme
modifications, press the "Set" button and hold it until the devices moves to the
first value of previously modified programme – the device will be activated in auto
mode with programme preset operation and pause time values as well as preset
number of rounds.

Use the operation time selector knob to set the desired duration of ozone
treatment.

Turn the device on using the ON/OFF button located on the rear panel

Set the desired ozonisation time value using the ozonisation set knob.

Use the ozone control knob to set the ozone level. The available range is 0-
.
10000mgh
EN