Philips S9000 Serie Manuel D'instructions page 29

Icon Behavior
Becomes visible on the Quick
Clean Pod
Replacing the Quick Clean Pod Cartridge
6 Put the top of the Quick Clean Pod back onto the base
and turn it clockwise until you hear a click.
Do not tilt the Quick Clean Pod to prevent leakage.
Using the Quick Clean Pod
Note: If you use the shaver with shaving foam, shaving
gel or pre-shave products, thoroughly rinse the shaving
heads before you use the Quick Clean Pod (see 'How do I
clean my appliance and the attachments?').
Always shake excess water off the shaver before you
place it in the Quick Clean Pod.
1 Place the shaver upside down into the Quick Clean
Pod. While switched on, the shaver automatically
detects that it is in the Quick Clean Pod.
2 Switch on the shaver to start the cleaning program.
Each cleaning program takes approximately one
minute. During the cleaning program the remaining
time is displayed as a countdown clock on the handle.
3 Let the shaver air-dry completely in the Quick Clean
Pod before storing it.
What does the icon on my Quick Clean Pod mean?
Replace the Quick Clean Pod Cartridge immediately
when the cartridge replacement icon on the Quick Clean
Pod becomes visible or follow the table below.
Meaning
The Quick Clean Pod Cartridge
needs to be replaced (see 'How do
I use the Quick Clean Pod?').
29
English