Publicité
•
Make sure the appliance is unplugged and empty.
•
To remove the door, you first need to tilt the appliance backwards. Lean the
appliance against a hard surface to prevent it from slipping during the
operation.
•
All the parts removed must be kept to refit the door. Do not lay the appliance
down on the floor as this may damage the cooling system.
Ideally, the appliance should be handled by 2 people during the operation.
•
1. Remove the top hinge covers.
2. Open the door and unscrew the top hinge. Then lift the door to remove it from the appliance and
put it on foam to avoid scratching and damaging it.
3. Remove the cover and the screws on the left side and put them on the right side.
4. Delicately position the back of the cabinet on a padded surface. Start by removing the two
levelling feet. Then unscrew the door hinge and the base of the foot on the left side
78
Publicité
