Publicité
Manuel
EN
Connect your smart light to the FlinQ app
Notes: Make sure that the lamp is set up, placed and powered ON during the 1st setup
and within a range of 10 meters max between your mobile device and the lamp itself.
1
Open the FlinQ app
Open the FlinQ app on your mobile
device.
Wi-Fi - 5GHz
Wi-Fi - 5GHz
Wi-Fi - 2.GHz
Wi-Fi name
************
4
Fill in the WiFi details
Now fi ll in the WiFi name and password
to continue the installation
Add Device
Create Scene
2
Add the device
Select 'Add Device' or the '+' sign and
make sure the red light on the lamp is
fl ashing rapidly.
FlinQ Smart Outdoor Solar Spot
Being added...
5
Device is being added
The device is installed. This can take up
to 2 minutes.
Notes: For users that don't want to use the lamp by the FlinQ app, they can wait for the
red led light fl ashing for more than 3 minutes so the lamp will be automatically working
in the warm white light only.
FlinQ Smart Outdoor
Solar Spot
3
Select product type
Select your product type via the light section tab. Please select the 'FlinQ Smart
Outdoor Solar Spot'. Make sure the light is fl ashing, if not press the ON and OFF button
for at least 5x "on-off -on-off -on-off -on-off " to restore the pairing factory setting.
6
Device added succesfully
The device is installed succesfully and
added to your list of products. You can
now control your device remotely.
FlinQ Smart Outdoor Solar Spot
7
Google Home & Amazon Alexa
To control your device by using your
voice via a smart speaker, please refer to
the manufacturers instructions manual
on how to enable a voice command
through your device.
Publicité
