Télécharger Imprimer la page

FLINQ FQC8346 Manuel D'instructions page 3

Publicité

Manuel
EN
Specifications
APP control functions
Battery indicator, status, RGB colors or all white
colors, solar function, dimmable function, ambient
night light function, scene's and more
Bluetooth Control Distance
Max. 10 meters
Automatic light ON/OFF
Yes, by light intelligent auto light sensor
Work time
3-9 Hours max always ON (depends on seasons
and depends on settings and color selection)
Durable housing
completely corrosion free
Waterproof
IPX5 waterproof
Solar panel
High efficiency advanced black mono-crystalline
solar panel 1.5Wp 20% conversion. Solar mono
black panel power: 5.5V / 1.5W solar panel lamina-
ted, 137x80x1.3mm
Solar charging
Max 6 ~ 8hrs in direct sun (depends on seasons)
Standby power
<5mA (RTC enabled)
Protect function
yes, hardware & software (over charge/over
discharging and short circuit)
Kelvin
2700-6500°K + Color adjustable by app
HP LED
SMD high power 5050 LED 15pcs, WW + CW + Red/
Green/Blue
Lumen
50lm max for white colors, 46lm max for RGB co-
lors (dimmable by app with ambient function)
Angle from light
120 degrees
Lifespan
< 50.000 hours
Battery
HPC Li-Ion rechargeable battery 3.7V 1200mAh
4,44Wh (18650 replaceable type)
Dimensions
L370xW260x100mm
Materials
ABS+PC plastics
European Regulatory Notice for wireless function in Europe:
Antenna Gain: 2.5dBi
Frequency band range: 2.402 ~ 2.480 GHz
Max. Radio Transmission Power: <10dBm
This product is an light product. It is developed for giving light in outdoor area use.
Read and follow the instructions contained in this manual carefully. Keep these
instructions at a safe place for future reference or give to third parties. IP X4: Only for
outdoor use. Never immerse this light under water. The operating life of the product
will be less if the ambient temperature is higher than 45°C or lower than -10°C.
Note:
During the first use of the product, place the product in a place with sufficient
direct sunlight for first charging at a minimum time for 2~3 days in the OFF switch
position! When the sky is overcast, this period should be extended.
When the lamp is in a location that receives less sunlight, it will operate for fewer
hours per night. Night lighting time can also vary depending on how bright the sky is
on any given day. Insufficient charging of the battery will affect performance and may
result in the fact that the lamp goes off before dawn because the battery was not fully
charged.
The solar panel is best directed as much as possible towards the south in order to
maximize exposure to direct sunlight. Please note that the four different seasons (and
the light angle in these four different seasons) can affect the lighting time of the lamp.
The solar light will work longer in summer then during winter time and will make the
solar panel charge the internal battery less, or even not at all, than during summer
time. Your solar lights will produce more hours of operation when installed in an
area which is free from cover, shade or shadowing. Due to low sunlight intensity, and
severe weather such as cloudy rain in autumn and cloudy snow in winter, the total
lighting time in these months will be reduced.
Select a location that is not located close to other light sources, such as for example
street lighting, because this enables the lamp to be switched off automatically.
Maximum lighting time depends on sunlight and daytime charging. Minimum charging
time is 6 ~ 8 hours in direct sunlight.
FlinQ Smart Outdoor Solar Spot

Publicité

loading