Publicité
Power on
Remove air
2.
When the robot has no power, it will
automatically stop at the edge of the pool.
(May also get stuck in the middle of the pool
if there are obstacles in the water.)
Note:
1. It is recommended to turn off the filtration system as the water circulation in the pool may affect
the robot's motion mode.
2. Any obstacle in the swimming pool can affect the robot's cleaning pattern, such a ladder.
3. If salt is your sanitizer, make sure that all the salt is dissolved before putting the robot into the water.
Debris Access & Disposal
1.
2.
1. Press the on/off button located under the
cleaner until the button lights up. Hold the
robot horizontally under the water for
approximately 20-30 seconds. The robot
should sink freely down to the bottom of the
pool.
3.
A hook is included with the cleaner. Attach it to
a telescopic pole (not included) to easily remove the
cleaner from the pool.
3.
4
4.
Publicité
