Publicité
CONTROLS
The hood is fitted with a control panel with aspiration speed selection control and a light switch to control cooking area lights.
To select the functions of the hood just touch the commands.
Light key ON/OFF
Intensive speed selection key (suction
power) - duration 5 minutes - press again to
return to previous setting.
High-speed selection key (suction power).
Medium-speed selection key (suction
(2)
power) - when flashing it indicates the need
to wash or replace the carbon filter. This
signal is normally deactivated. To activate
the alarm, disabling controls, key 0 Press
keys 1 and 2 at the same time to activate it.
At first only key 1 will flash and then both
keys 1 and 2 to indicate activation. Repeat
the operation to deactivate the signal. At
first keys 1 and 2 will flash and then only
key 1 to indicate deactivation.
Low-speed selection key (suction power)
(1)
– when flashing it indicates the need to
wash the grease filter.
Motor OFF Key - stand by - reset
wash/replace filters signal - disables
(0)
selection keys
MOTOR OFF
Press briefly to switch the motor off.
RESET FILTERS SIGNALS
After having carried out maintenance of the
filters, press the key for 3 seconds. Flashing
led 1 (fats filter) or 2 (carbon filter) will stop
flashing.
DISABLING CONTROLS
Pressing the key for 3 seconds the speed
selection keys will be disabled.
This function can be useful during the
product cleaning operations to avoid
operating the hood accidentally.
again for 3 seconds to enable again.
If the hood fails to operate correctly, briefly disconnect it from the mains power supply for almost 5 sec. by pulling out the plug. Then
plug it in again and try once more before contacting the Technical Assistance Service.
Press
7
Publicité
