Publicité
1. If the burner will not light after several attempts
then the burner can be match lit, before using the
match allow 5 minutes for any accumulated gas to
dissipate.
2. Clip a match on one end of the lighting rod.
3. Light match.
4. Hold lighting rod and insert lighted match right
next to the burner ports or ceramic file.
5. Push and turn the designated control knob to
6. Burner should ignite immediately.
To reduce the probability of exposing the battery to
conditions of misuse and/or abuse, please follow
battery installation instructions below.
a)
Non-rechargeable batteries are not to be recharged.
b)
Do not mix different types of batteries such as
alkaline, carbon-zinc, or rechargeable batteries.
c)
Do nit mix old and new batteries.
d)
Exhausted batteries are to be removed from the
product.
•
Main burner
.
Important Battery Information
12
Match Lighting
Side burner
-
+
Publicité
