AIR FILTER SERVICE
The air filter can get dirty after prolonged use and needs to be cleaned or
replaced regularly. If frequently operating in dusty environments, maintenance
must be done more often.
1. Loosen bolts and remove the right side cover.
2. Remove the screw on the
cover for the air filter.
3. Clean foam filter element with cleaning solvent and
allow it to air dry. Place a few drops of oil on the filter.
attention: the air filter is delicate. do not forcibly
twist the filter to prevent damage.
4. Put the foam air filter back into place.
tip: make sure that the surface of the filter is in close
contact with the intake. make sure there are no gaps
do not start the engine without the air filter in place.
5. Reinstall the air cleaner cap. Reassemble the outer cover on the unit.
19