Publicité
E - 14
Problem
Picture is fuzzy
Picture bounces or a
waving pattern is
present in the picture
Edges of the display
image are not square
Display image is not
centered, too smaIl, or
too large
Color looks blotchy
Specifications
Picture Tube
E
500
viewable image size,
E
700
viewable image size,
0.25 mm mask pitch, Medium-Short persistence
phosphor, dark tint screen, CROMACLEAR CRT with
multi-layered, anti-static OptiClear coating
Input Signal
Video
Sync
All manuals and user guides at all-guides.com
Check These Items
Adjust the Brightness, then Contrast Controls.
Access the Degauss Control through OSM.
Activate the Degauss Control. CAUTION: A
minimum interval of 20 minutes should exist
before the Degauss Function is used a second time.
Move electrical devices that may be causing
electrical interference away from the monitor.
Use the OSM Geometry Controls to straighten the
edges.
Use the OSM Size and Position controls to adjust
the image.
Adjust the Brightness, then Contrast Controls.
Access the Degauss Control through OSM.
Activate the Degauss Control. CAUTION: A
minimum interval of 20 minutes should exist
before the Degauss Control is used a second time.
: 38 cm (15 inch) flat square CRT, 35 cm (13.8 inch)
: 43 cm (17 inch) flat square CRT, 39.6 cm (15.6 inch)
Analog 0.7 Vp-p 75 Ω Positive
Separate sync.
Horizontal sync.
Vertical sync.
Composite sync.
Specifications
TTL Level
Positive/Negative
Positive/Negative
TTL Level
Positive/Negative
Publicité
