Publicité
EN
Distances from ammable materials
ith uninsulated ue pipe (provided on the product label)
Back
(d
)
R
Front
(d
)
P
Front to the oor
(d
)
F
Side
(d
)
S
Side with glass
(d
)
S1
Side – niche
(d
)
S2
Side – location 45°
(d
)
S3
Side radiation
(d
)
L
From the oor
(d
)
B
From the ceiling
(d
)
C
Distances from ammable materials with insulated ue pipe *
Back
(d
)
R
Side
(d
)
S
Distances from ammable materials with insulated ue pipe and hanging plate (shielding) *
Back
(d
)
R
Side
(d
)
S
Distances from nonammable materials
Back
(d
)
Rnon
Side
(d
)
Snon
Side – niche
(d
)
S2non
All local regulations, including regulations relating to national and European standards, must be observed during the installation and operation of
the product.
The distance assumes the use of an insulated ue pipe with a minimum insulation thickness of 25 mm up to the product.
*
Notice
If the products are installed in areas where air is suctioned by fans, hoods, heating or ventilation equipment, external air
intake (EAI) must be ensured. Turn off all ventilation devices in the house before the planned stoking.
The product must be installed on oors with adequate load bearing capacity.
Adequate access for cleaning and maintenance of your product, ue and chimney must be provided during installation,
unless the product can be cleaned from another location such as the roof or a dedicated door.
The product and its ue gas paths must be regularly and thoroughly rechecked and cleaned before and after the heating
season.
Read the general instructions carefully.
Note
S t o r c h k a m i n e
I n s t a l l a t i o n i n s t r u c t i o n s
10 | 28
38/140
VULSINI HE10 EX
250
800
---
250
---
---
---
---
---
800
---
---
---
---
80
250
---
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
Publicité
