Publicité
HIGH-PRESSURE PUMP
Style 1
This pump is a maintenance free design and does
not need attention at this time.
Style 2
The high-pressure pump will have a breather vent that needs your attention before using
the washer for the first time. Please see below for which style you may have.
RED shipping cap
1. Using a bladed screw driver, remove
the RED shipping plug from the top
of the pump.
2. Hand thread the BLACK breather
cap into the pump.
3. Snug the cap with your fingers.
Page 7
OR
RED shipping plug
1. Grasp the label and remove both it
and the RED shipping plug.
2. The breather is now open properly.
Publicité
